Replacement for SONY Dcr-pc5e Battery

SONY Dcr-pc5e Battery

( Hi-Quality & High Capacity 3.7V (works with 3.6V battery) 1400mAh SONY Dcr-pc5e Camcorder Batteries)

  • List Price:
  • Your Price:
+
4 in 1 USB 2.0 memory card reader
=

Saving Money: Buy SONY Dcr-pc5e Battery together with 4 in 1 USB 2.0 memory card reader

SONY Dcr-pc5e Battery Replacement Battery Code: ( Press " Ctrl+F " to Find )

Sony BP-11SCL, Sony BP-I2503ALS, Sony M3636CL, Sony NP-F10, Sony NP-F11, Sony NP-F20, Sony NP-F30, Sony NP-FM10, Sony NP-FS10, Sony NP-FS11, Sony NP-FS12, Sony SONYNPFS12, Sony SONYNPFS22, Sony SONYNPFS32, Sony VSN017L28D,

SONY Dcr-pc5e Camcorder Batteries usage tips:

  1. Please check your original SONY Dcr-pc5e Battery part number & model number with our postings picture before the purchase to make sure you get the correct battery for SONY Dcr-pc5e. Replacement Battery SONY Dcr-pc5e are brand new with new case and new cells, we have 1 year replacement warranty on these SONY Dcr-pc5e Camcorder Batteries.
  2. New SONY Replacement battery DCR-PC5E usually comes in a discharged condition and with a very low capacity. It is generally recommended to fully charge new battery packs before use. The SONY Dcr-pc5e battery pack needs to be circulated (fully discharged and recharged) 3 - 5 times to reach its optimum performance.
  3. Rechargeable battery for SONY Dcr-pc5e will undergo self-discharging when left unused. It should always be stored in a fully charged status and kept in a cool, dry and clean place. To maintain the optimum performance of SONY Dcr-pc5e battery pack, it is highly recommended to fully discharge and recharge it at least once a month.
  4. It is normal if a battery gets warm when being charged or used. However, please pay high attention when the battery pack becomes excessively hot. This may indicate a problem with the charging circuit of your electronic device. It is necessary to have it checked by qualified technicians when this occurs.
  5. Sometimes,SONY Dcr-pc5e Camcorder Batteries is hard to be charged. Your electronic device may indicate a fully charged condition for about 10 to 15 minutes when a new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for awhile. Repeat the charging procedure again. When a new SONY Dcr-pc5e battery is unable to charge, it is suggested to remove the battery from the device and reinsert it for several times to wake up dormant cells. Occasionally, BIOS updating is required to make the battery work normally on your device.

Featured Products