Replacement for EPSON L-500v Battery

EPSON L-500v Battery Replacement

( Hi-Quality & High Capacity 3.70V 1230mAh EPSON L-500v Digital Camera Batteries)

  • List Price:
  • Your Price:
+
4 in 1 USB 2.0 memory card reader
=

Saving Money: Buy EPSON L-500v Battery together with 4 in 1 USB 2.0 memory card reader

EPSON L-500v Battery Replacement Battery Code: ( Press " Ctrl+F " to Find )

EPSON B31B173003CU, EPSON B32B818242, EPSON EPALB2, EPSON EU-94,

EPSON L-500v Battery Fit Digital Camera Batteries Models: ( Press " Ctrl+F " to Find )

EPSONL-500V ,

EPSON L-500v Digital Camera Batteries usage tips:

  1. Please check your original EPSON L-500v Battery part number, EPSON L-500v Battery model number with our postings picture before the purchase to make sure you get the correct battery for EPSON L-500v. Replacement Battery EPSON L-500v are brand new with new case and new cells, we have 1 year replacement warranty on these EPSON L-500v Digital Camera Batteries.
  2. New EPSON Replacement battery L-500V usually comes in a discharged condition and with a very low capacity. It is generally recommended to fully charge new battery packs before use. The EPSON L-500v battery pack needs to be circulated (fully discharged and recharged) 3 - 5 times to reach its optimum performance.
  3. Rechargeable battery EPSON L-500v will undergo self-discharging when left unused. It should always be stored in a fully charged status and kept in a cool, dry and clean place. To maintain the optimum performance of EPSON L-500v battery pack, it is highly recommended to fully discharge and recharge it at least once a month.
  4. It is normal if a battery gets warm when being charged or used. However, please pay high attention when the battery pack becomes excessively hot. This may indicate a problem with the charging circuit of your electronic device. It is necessary to have it checked by qualified technicians when this occurs.
  5. Sometimes,EPSON L-500v Digital Camera Batteries is hard to be charged. Your electronic device may indicate a fully charged condition for about 10 to 15 minutes when a new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for awhile. Repeat the charging procedure again. When a new EPSON L-500v battery is unable to charge, it is suggested to remove the battery from the device and reinsert it for several times to wake up dormant cells. Occasionally, BIOS updating is required to make the battery work normally on your device.

Featured Products