Replacement for FUJIFILM Mx-600 Battery

FUJIFILM Mx-600 Battery Replacement

( Hi-Quality & High Capacity 3.7V (compatible with 3.6V) 1850mAh FUJIFILM Mx-600 Digital Camera Batteries)

  • List Price:
  • Your Price:
4 in 1 USB 2.0 memory card reader

Saving Money: Buy FUJIFILM Mx-600 Battery together with 4 in 1 USB 2.0 memory card reader

FUJIFILM Mx-600 Battery Replacement Battery Code: ( Press " Ctrl+F " to Find )

Bescor BPLI100, Delkin DD/NP-100, Empire BLI-174, Energizer ER-D, FUJIFILM NP-100, GP VFL003, Hahnel HL-100, Hama 47210, Helios HS-DC101, JVC BN-V101, Polaroid PR-102DG, Rayovac RV-DC2100, Ricoh DB-30, Sony DFU003l01, Sony VSN025, Toshiba NP-100, Uniross VB100563, Vivanco BP-1843,

FUJIFILM Mx-600 Digital Camera Batteries usage tips:

  1. Please check your original FUJIFILM Mx-600 Battery part number, FUJIFILM Mx-600 Battery model number with our postings picture before the purchase to make sure you get the correct battery for FUJIFILM Mx-600. Replacement Battery FUJIFILM Mx-600 are brand new with new case and new cells, we have 1 year replacement warranty on these FUJIFILM Mx-600 Digital Camera Batteries.
  2. New FUJIFILM Replacement battery MX-600 usually comes in a discharged condition and with a very low capacity. It is generally recommended to fully charge new battery packs before use. The FUJIFILM Mx-600 battery pack needs to be circulated (fully discharged and recharged) 3 - 5 times to reach its optimum performance.
  3. Rechargeable battery FUJIFILM Mx-600 will undergo self-discharging when left unused. It should always be stored in a fully charged status and kept in a cool, dry and clean place. To maintain the optimum performance of FUJIFILM Mx-600 battery pack, it is highly recommended to fully discharge and recharge it at least once a month.
  4. It is normal if a battery gets warm when being charged or used. However, please pay high attention when the battery pack becomes excessively hot. This may indicate a problem with the charging circuit of your electronic device. It is necessary to have it checked by qualified technicians when this occurs.
  5. Sometimes,FUJIFILM Mx-600 Digital Camera Batteries is hard to be charged. Your electronic device may indicate a fully charged condition for about 10 to 15 minutes when a new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for awhile. Repeat the charging procedure again. When a new FUJIFILM Mx-600 battery is unable to charge, it is suggested to remove the battery from the device and reinsert it for several times to wake up dormant cells. Occasionally, BIOS updating is required to make the battery work normally on your device.

Featured Products