Replacement for KODAK Easyshare z1015 Is Battery

KODAK Easyshare z1015 Is Battery Replacement

( Hi-Quality & High Capacity 3.7V 1600mAh KODAK Easyshare z1015 Is Digital Camera Batteries)

  • List Price:
  • Your Price:
+
4 in 1 USB 2.0 memory card reader
=

Saving Money: Buy KODAK Easyshare z1015 Is Battery together with 4 in 1 USB 2.0 memory card reader

KODAK Easyshare z1015 Is Battery Replacement Battery Code: ( Press " Ctrl+F " to Find )

Kodak KLIC-8000,

KODAK Easyshare z1015 Is Digital Camera Batteries usage tips:

  1. Please check your original KODAK Easyshare z1015 Is Battery part number, KODAK Easyshare z1015 Is Battery model number with our postings picture before the purchase to make sure you get the correct battery for KODAK Easyshare z1015 Is. Replacement Battery KODAK Easyshare z1015 Is are brand new with new case and new cells, we have 1 year replacement warranty on these KODAK Easyshare z1015 Is Digital Camera Batteries.
  2. New KODAK Replacement battery EASYSHARE Z1015 IS usually comes in a discharged condition and with a very low capacity. It is generally recommended to fully charge new battery packs before use. The KODAK Easyshare z1015 Is battery pack needs to be circulated (fully discharged and recharged) 3 - 5 times to reach its optimum performance.
  3. Rechargeable battery KODAK Easyshare z1015 Is will undergo self-discharging when left unused. It should always be stored in a fully charged status and kept in a cool, dry and clean place. To maintain the optimum performance of KODAK Easyshare z1015 Is battery pack, it is highly recommended to fully discharge and recharge it at least once a month.
  4. It is normal if a battery gets warm when being charged or used. However, please pay high attention when the battery pack becomes excessively hot. This may indicate a problem with the charging circuit of your electronic device. It is necessary to have it checked by qualified technicians when this occurs.
  5. Sometimes,KODAK Easyshare z1015 Is Digital Camera Batteries is hard to be charged. Your electronic device may indicate a fully charged condition for about 10 to 15 minutes when a new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for awhile. Repeat the charging procedure again. When a new KODAK Easyshare z1015 Is battery is unable to charge, it is suggested to remove the battery from the device and reinsert it for several times to wake up dormant cells. Occasionally, BIOS updating is required to make the battery work normally on your device.

Featured Products