Replacement for KODAK KLIC-7001 Battery

KODAK KLIC-7001 Digital Camera Batteries

( Hi-Quality & High Capacity 3.7V 800mAh Replacement Battery For KODAK KLIC-7001 )

  • List Price:
  • Your Price:
+
=

Saving Money: Buy KODAK KLIC-7001 Digital Camera Batteries together with KODAK KLIC-7001 Charger

KODAK KLIC-7001 Battery Replacement Battery Code: ( Press " Ctrl+F " to Find )

KODAK KLIC-7001,

KODAK KLIC-7001 Digital Camera Batteries usage tips:

  1. Please check your original KODAK KLIC-7001 Battery part number, KODAK KLIC-7001 Battery model number with our postings picture before the purchase to make sure you get the correct battery for KODAK KLIC-7001. Replacement Battery KODAK KLIC-7001 are brand new with new case and new cells, we have 1 year replacement warranty on these KODAK KLIC-7001 Digital Camera Batteries.
  2. New KODAK Replacement battery KLIC-7001 usually comes in a discharged condition and with a very low capacity. It is generally recommended to fully charge new battery packs before use. The KODAK KLIC-7001 battery pack needs to be circulated (fully discharged and recharged) 3 - 5 times to reach its optimum performance.
  3. Rechargeable battery KODAK KLIC-7001 will undergo self-discharging when left unused. It should always be stored in a fully charged status and kept in a cool, dry and clean place. To maintain the optimum performance of KODAK KLIC-7001 battery pack, it is highly recommended to fully discharge and recharge it at least once a month.
  4. It is normal if a battery gets warm when being charged or used. However, please pay high attention when the battery pack becomes excessively hot. This may indicate a problem with the charging circuit of your electronic device. It is necessary to have it checked by qualified technicians when this occurs.
  5. Sometimes,KODAK KLIC-7001 Digital Camera Batteries is hard to be charged. Your electronic device may indicate a fully charged condition for about 10 to 15 minutes when a new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for awhile. Repeat the charging procedure again. When a new KODAK KLIC-7001 battery is unable to charge, it is suggested to remove the battery from the device and reinsert it for several times to wake up dormant cells. Occasionally, BIOS updating is required to make the battery work normally on your device.

Featured Products