Replacement for SONY Cybershot Bc-tr1 Battery

SONY Cybershot Bc-tr1 Battery Replacement

( Hi-Quality & High Capacity 3.7V (compatible with 3.6V) 680mAh SONY Cybershot Bc-tr1 Digital Camera Batteries)

  • List Price:
  • Your Price:
+
4 in 1 USB 2.0 memory card reader
=

Saving Money: Buy SONY Cybershot Bc-tr1 Battery together with 4 in 1 USB 2.0 memory card reader

SONY Cybershot Bc-tr1 Battery Replacement Battery Code: ( Press " Ctrl+F " to Find )

Sony NP-FT1,

SONY Cybershot Bc-tr1 Digital Camera Batteries usage tips:

  1. Please check your original SONY Cybershot Bc-tr1 Battery part number, SONY Cybershot Bc-tr1 Battery model number with our postings picture before the purchase to make sure you get the correct battery for SONY Cybershot Bc-tr1. Replacement Battery SONY Cybershot Bc-tr1 are brand new with new case and new cells, we have 1 year replacement warranty on these SONY Cybershot Bc-tr1 Digital Camera Batteries.
  2. New SONY Replacement battery CYBERSHOT BC-TR1 usually comes in a discharged condition and with a very low capacity. It is generally recommended to fully charge new battery packs before use. The SONY Cybershot Bc-tr1 battery pack needs to be circulated (fully discharged and recharged) 3 - 5 times to reach its optimum performance.
  3. Rechargeable battery SONY Cybershot Bc-tr1 will undergo self-discharging when left unused. It should always be stored in a fully charged status and kept in a cool, dry and clean place. To maintain the optimum performance of SONY Cybershot Bc-tr1 battery pack, it is highly recommended to fully discharge and recharge it at least once a month.
  4. It is normal if a battery gets warm when being charged or used. However, please pay high attention when the battery pack becomes excessively hot. This may indicate a problem with the charging circuit of your electronic device. It is necessary to have it checked by qualified technicians when this occurs.
  5. Sometimes,SONY Cybershot Bc-tr1 Digital Camera Batteries is hard to be charged. Your electronic device may indicate a fully charged condition for about 10 to 15 minutes when a new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for awhile. Repeat the charging procedure again. When a new SONY Cybershot Bc-tr1 battery is unable to charge, it is suggested to remove the battery from the device and reinsert it for several times to wake up dormant cells. Occasionally, BIOS updating is required to make the battery work normally on your device.

Featured Products